To be honest we hadn't realized that the service bulletin on the top had unlinked on the site until you called.... Anyways, I'll get it fixed on the site.

Pretty straight forward.

#1 Attach the leather loops over the center bar.
#2 Screw Down the tensioning screws at the folding portion to take all tension off the bows.
#3 attach to the back edge of the cab
#4 Pull the canvas snug and with a punch screw in the screws and strip along the front edge edge of the bows starting from the center going out.
#5 Install the rear strip and screws on the back of the bows.
#6 Re-tension the top with the tensioning screws.

Install in the heat/sun as it makes the top easier to stretch.

Cheers,

Scott